This product requires a service every 6 months to ensure it continues to operate safely and efficiently. Regular servicing helps maintain performance, prevent issues, and extend the lifespan of your equipment.
Service Interval Reminder
This product requires a service every 6 months to ensure it continues to operate safely and efficiently. Regular servicing helps maintain performance, prevent issues, and extend the lifespan of your equipment.
Electro Galvanised Collared Eyebolts – Metric Thread M6-M30
UNB-EB-SC-1
Self Colour Collared Eyebolts with metric threads M6-M64 and 0.1t-20t WLL. Drop forged and heat treated from high tensile steel, with WLL marking for industrial lifting applications.
From: £2.71£3.25 Exc VATInc VAT
Description
Electro Galvanised Collared Eyebolts M6-M30
The collared design provides a positive seating surface against the load when correctly installed, while the forged and heat-treated construction provides a strong and durable lifting point.
The electro galvanised finish provides additional surface protection compared with a self-colour finish, making these eyebolts suitable for a range of industrial environments where improved resistance to surface corrosion is required.
Each eyebolt is marked with the relevant Working Load Limit (WLL), size, CE marking and product identification mark for clear identification before use.
Electro Galvanised Finish
The electro galvanised finish provides a protective zinc coating to the steel surface, helping to improve resistance to corrosion during storage and use.
This makes the electro galvanised version a useful option where a more protected finish is preferred over the natural self-colour steel finish.
The finish does not change the rated Working Load Limit of the individual eyebolt. The applicable WLL remains dependent on the selected size and the manufacturer’s specified loading conditions.
Working Load Limits
The Working Load Limit depends on the size of the eyebolt and the direction of loading. The published WLL applies to the specified loading conditions, so the eyebolt must be correctly installed and loaded in accordance with the manufacturer’s instructions.
For non-axial loading, reductions in WLL may apply. Do not assume the full rated WLL applies when the load is not aligned with the eyebolt.
The available electro galvanised range covers 0.1t to 4t WLL across thread sizes from M6 to M30.
Technical Specifications
| Specification | Details |
|---|---|
| Product type | Collared eyebolt |
| Thread | Metric |
| Material | High tensile steel |
| Manufacturing | Drop forged and heat treated |
| Finish | Electro galvanised |
| Thread sizes | M6, M8, M10, M12, M16, M20, M24, M30 |
| WLL range | 0.1t to 4t |
| Minimum breaking load | 5 × WLL |
| Standard | BS 4278 WLL performance requirements |
| Marking | CE, WLL, size and product ID |
| Certification | Certificate 2.1 and Declaration of Conformity available |
Dimensions & Working Load Limits
| Thread Size | WLL (t) | A (mm) | B (mm) | D (mm) | E (mm) | F (mm) | G (mm) | Weight (kg) |  |
|---|---|---|---|---|---|---|---|---|---|
| M6 | 0.10 | 22 | 7 | 15 | 9 | 20 | 18 | 0.06 | |
| M8 | 0.15 | 22 | 7 | 15 | 9 | 20 | 19.5 | 0.06 | |
| M10 | 0.25 | 22 | 7 | 15 | 9 | 20 | 19.5 | 0.06 | |
| M12 | 0.40 | 22 | 7 | 15 | 9 | 20 | 19.5 | 0.06 | |
| M16 | 0.80 | 29 | 10 | 20 | 12 | 26 | 24.5 | 0.15 | |
| M20 | 1.60 | 40 | 14 | 27 | 16 | 36 | 33.5 | 0.30 | |
| M24 | 2.50 | 52 | 17 | 35 | 21 | 46 | 41.5 | 0.85 | |
| M30 | 4.00 | 65 | 22 | 44 | 26 | 58 | 51 | 1.62 |
Important: Always check the product drawing and manufacturer’s technical information for the full dimensional details and applicable loading conditions before use.
Applications
Electro galvanised collared eyebolts can be used as fixed lifting points where a threaded lifting connection is required, including applications involving:
- Machinery and equipment
- Fabricated steelwork
- Material handling equipment
- Industrial lifting applications
- Maintenance and installation work
- Lifting and positioning of equipment
The suitability of an eyebolt depends on the application, installation method, load direction and supporting material. The supporting structure and threaded hole must be capable of safely withstanding the applied load.
Installation & Safe Use
Correct installation is essential for the safe use of any lifting eyebolt.
Before use, check that the eyebolt is undamaged, correctly sized and fully engaged with the available thread. The mating thread should be clean, correctly formed and capable of supporting the required load.
The eyebolt must be loaded in accordance with its rated application. Non-axial loading can reduce the allowable WLL, so additional care is required where the lifting force is not aligned with the eyebolt.
Never exceed the applicable WLL and always inspect lifting points before use for signs of damage, distortion, excessive wear or corrosion.
The electro galvanised coating should also be checked for damage or deterioration, particularly where the eyebolt is being used in environments where corrosion protection is important.
If you are unsure which eyebolt or WLL is suitable for your application, contact Lifting Gear Products for advice before ordering.
Certification
Certificates are available for these collared eyebolts, including Certificate 2.1 and Declaration of Conformity.
Please select the required certificate when ordering or contact our team if you require certification for a specific application.
Why Buy from Lifting Gear Products?
Lifting Gear Products supplies lifting and handling equipment to customers across the UK, with specialist knowledge of lifting equipment and associated components.
If you are unsure which eyebolt, thread size or Working Load Limit is suitable for your application, our team can help you identify the appropriate product specifica tion.
Technical information
| Weight | N/A |
|---|---|
| WLL | 0.1t, 0.15t, 0.25t, 0.4t, 0.8t, 1.6t, 2.5t, 4 t |
| Thread | M10, M12, M16, M20, M24, M30, M6, M8 |
| Thread Length (mm) | 18, 19.5, 24.5, 33.5, 41.5, 51 |
| Thread Type | Metric |
| Product Type | Eye Bolt |
Key Features
- Electro galvanised collared eyebolt
- Drop forged from high tensile steel
- Heat treated for strength and durability
- Electro galvanised finish
- Metric threads from M6 to M30
- Working Load Limits from 0.1t to 4t
- Minimum breaking load of 5 × WLL
- Marked with WLL, size, CE marking and product identification
- Meets the WLL performance requirements of BS 4278
- Certificates available, including Certificate 2.1 and Declaration of Conformity
Safety & User Instructions
- Check the eyebolt, thread and supporting structure before each use
- Ensure the eyebolt is fully engaged and correctly seated before lifting
- Do not exceed the stated Working Load Limit (WLL)
- Use only in the specified loading direction and application
- Reduce the WLL where non-axial loading applies
- Never shock load, side load or subject the eyebolt to sudden impact
- Inspect for signs of wear, deformation, damage or corrosion before use
- Remove from service if any defect or damage is identified
- Ensure the mating thread is clean, undamaged and suitable for the required load
- Always follow the manufacturer’s installation and safe-use instructions
