This product requires an inspection every 6 months under LOLER to ensure it remains safe to use. Inspections maintain compliance, prevent issues, and can extend the lifespan of your equipment. Book an inspection.

PlumAlti UK Made Bespoke Heavy-Duty Polyester Round Sling – 1t-120t WLL

PLM-RS-UK

PlumAlti bespoke polyester round slings, manufactured in Manchester to your exact effective working length, from 0.5m up to 40m, and from 1t to 120t WLL. Built to EN 1492-2 with a 7:1 safety factor, with optional single or double-part protective sleeves and private labelling. Ideal for heavy, project and engineered lifts where a standard sling will not do.

Price on request

Please enter your desired length (500mm-40,000mm)

Product Options
Protective Sleeve?

Single-part protective sleeves are applied during manufacture and encase the round sling, whereas double-part sleeves secure the sling and create two exposed ends.

None Single Part Double Part None

When selecting a Single Part Sleeve, ensure the total sling length is not exceeded. For a Double Part Sleeve, ensure the EWL is not exceeded. Note that round slings are supplied at twice their effective working length (EWL).

If you would like to request a change to this product that isn’t available within the current options, please enter your requirements here. Any modifications will need to be processed through our quote system rather than purchased directly online.

Add to Quote

Description

PlumAlti UK Made Bespoke Heavy-Duty Polyester Round Sling – 1t-120t WLL

When a standard sling is not the right length or capacity for the job, a PlumAlti bespoke round sling is made to suit. Manufactured at our Manchester facility to your specified effective working length (EWL), from 0.5m up to 40m, and Working Load Limit, from 1 tonne up to 120 tonnes, each sling is built to order for the lift it will be used on, giving you the correct fit, the correct capacity and full traceability from day one.

Why Specify a Bespoke Round Sling?

Off-the-shelf slings come in fixed lengths, which can mean compromising on sling angle, headroom or hook height. A bespoke sling removes that compromise. By specifying the exact EWL, you can:

  • Achieve the correct sling angle for multi-leg or basket lifts
  • Work within limited headroom beneath cranes and roof structures
  • Match leg lengths precisely for level, balanced lifts
  • Reach long spans or large loads with lengths of up to 40m EWL
  • Avoid shortening or doubling up slings to make them fit

The result is a safer, more controlled lift and a sling that does exactly what your lift plan requires.

Capacities Beyond the Standard Range, up to 120 Tonnes

Alongside 1t–10t, the bespoke range covers high capacities from 12t through to 120t. These heavy-lift round slings are used for crane lifts on major plant, structural modules, offshore equipment and large engineered assemblies, where a high capacity is needed in a sling that remains soft, flexible and protective of the load. Very heavy loads can be lifted on round slings that are far lighter and easier to rig than equivalent chain or wire rope.

Made in Manchester with Full Traceability

Every bespoke sling is manufactured by PlumAlti in Manchester from 100% high-tenacity polyester, with a continuous load-bearing core enclosed in a protective outer sleeve. Making each sling in-house means lengths, capacities and sleeve options can be built exactly to your specification. Each sling is built to EN 1492-2 and the Machinery Directive 2006/42/EC, with a 7:1 safety factor for general lifting and 5:1 for specialised applications. A blue traceability label is fitted as standard, showing the serial number, WLL, length and certification details to support your LOLER records.

Factory-Fitted Protective Sleeves

Where slings will be used around sharp edges or abrasive surfaces, protective sleeves can be fitted during manufacture:

  • Single-part sleeve – encases the round sling along the length you specify
  • Double-part sleeve – secures the sling and creates two exposed ends, ideal for choke and basket rigging

Round slings are supplied at twice their EWL, so when choosing a single-part sleeve, make sure its length does not exceed the total sling length. For a double-part sleeve, it should not exceed the EWL.

Private Labelling

For distributors, hire companies and large site operators, slings can be supplied with private labelling, so your own branding appears on the slings you put into service.

Colour Coding and Working Load Limits

All bespoke slings follow the EN 1492-2 colour code for quick identification of capacity, with orange used for 10t and above. The WLL varies with the hitch used: a choke hitch is rated at 0.8 × WLL, a parallel basket at 2 × WLL, and a 0–45° basket at 1.4 × WLL. These mode factors are printed on every sling label.

How to Order

Select the WLL, enter your required EWL in millimetres (500mm to 40,000mm), and choose any protective sleeve options above. For anything outside the listed options, use the product modification request and our team will quote for your exact requirement.

Need a standard size quickly? Our ready-made PlumAlti Polyester Round Slings (1t–10t WLL) are available from stock in standard lengths.

Looking for a flat sling? See our bespoke Duplex Webbing Slings.

All round slings require a thorough examination at least every 6 months under LOLER. Our Sheffield and Manchester teams provide LOLER inspections for slings of every capacity.

Technical information

WLL

1t, 2t, 3t, 4t, 5t, 6t, 8t, 10t, 12t, 15t, 20t, 25t, 30t, 35t, 40t, 45t, 50t, 60t, 70t, 80t, 90t, 100t, 110t, 120t

Key Features

  • Manufactured to order by PlumAlti in Manchester
  • WLL from 1t to 120t, including heavy-lift capacities from 12t upwards
  • Made to your specified EWL, from 0.5m up to 40m
  • Exact lengths for correct sling angles, headroom and balanced lifts
  • Continuous high-tenacity polyester core inside a protective outer sleeve
  • Built to EN 1492-2 and Machinery Directive 2006/42/EC
  • 7:1 safety factor (5:1 for specialised applications)
  • Optional factory-fitted single or double-part protective sleeves
  • Private labelling with your own branding
  • EN 1492-2 colour coding, orange for 10t and above
  • Blue traceability label with serial number, WLL, length and certification
  • Far lighter and easier to rig than chain or wire rope of the same capacity
  • Usable from -40°C to +100°C

Safety & User Instructions

  • Use the sling only for the lift it was specified for, and do not exceed its WLL.
  • Apply the correct mode factor for the hitch used.
  • Do not use the sling if the label is missing or illegible.
  • Inspect the outer sleeve and any protective sleeves before each lift for cuts, abrasion, burns and chemical damage.
  • Withdraw the sling from service if the inner core is exposed or damaged.
  • Make sure protective sleeves are correctly positioned over sharp edges before lifting.
  • For heavy and multi-sling lifts, follow a lift plan prepared by a competent person.
  • Check the load is balanced and the sling is correctly seated, and avoid shock loading.
  • Do not knot or twist the sling, or drag it or pull it from under a load.
  • Use only within the -40°C to +100°C range.
  • Store clean and dry, away from UV light and chemicals.
  • Arrange a thorough examination at least every 6 months under LOLER.

More from

Products related to and

Best selling related products