This product requires an inspection every 6 months under LOLER to ensure it remains safe to use. Inspections maintain compliance, prevent issues, and can extend the lifespan of your equipment. Book an inspection.
PlumAlti UK Made Bespoke Heavy-Duty Duplex Webbing Slings – 1t-120t WLL
PLM-DWS-UK
PlumAlti UK-manufactured heavy-duty duplex webbing sling, 1–120 tonne WLL, BS EN 1492-1 compliant. Custom-length, colour-coded polyester sling for safe, flexible lifting in industrial, construction, and engineering applications.
Price on request
Description
PlumAlti UK Made Bespoke Heavy-Duty Duplex Webbing Slings – 1t-120t WLL
When an off-the-shelf webbing sling is too short, too long or not strong enough for the lift, a PlumAlti bespoke duplex webbing sling is made to fit. Manufactured at our Manchester facility to your specified effective working length (EWL), from 0.5m up to 40m, and Working Load Limit, from 1 tonne up to 120 tonnes, each sling is built to order for the lift it will be used on.
Why Specify a Bespoke Webbing Sling?
Standard slings come in set lengths, which can force compromises on sling angle, headroom and how the load sits. A bespoke sling is made to the exact length your lift plan needs, so you can:
- Set the correct sling angle for two-leg and basket lifts
- Work within restricted headroom under cranes and roof structures
- Order matched pairs or sets for level, evenly balanced lifts
- Cradle long loads in a basket hitch with lengths of up to 40m EWL
- Avoid joining, doubling or shortening slings to make them fit
Heavy-Lift Capacities from 12t to 120t
Alongside 1t–10t, the bespoke range covers heavy-lift capacities from 12t right up to 120t. At these weights, the flat profile of a webbing sling spreads the load across a wide bearing surface, keeping long, flat and square-sided loads stable in the sling. This makes it a strong choice for structural steel sections, bridge and building modules, large fabrications, wind and energy components, and heavy plant, where a high capacity is needed without the weight and bulk of chain or wire rope.
Made in Manchester with Full Traceability
Every bespoke sling is manufactured by PlumAlti in Manchester from 100% high-tenacity polyester webbing in a duplex (double-layer) construction for extra strength and wear resistance. Making each sling in-house means lengths, capacities and options can be built exactly to your specification. Slings are made to BS EN 1492-1 and the Machinery Directive 2006/42/EC with a 7:1 safety factor, and each one carries a blue traceability label showing the serial number, WLL, effective working length and safety factors to support your LOLER records.
Built to Last
Polyester webbing offers low elongation under load for steady, controlled lifting, along with good resistance to UV, oil, grease and abrasion. The slings can be used from -40°C to +100°C, so they are suitable for indoor and outdoor work throughout the year.
Protective Sleeves
For loads with sharp edges or abrasive surfaces, protective sleeves can be fitted during manufacture to the length you specify. Make sure the sleeve length does not exceed the total sling length when ordering.
Private Labelling
For distributors, hire companies and large site operators, slings can be supplied with private labelling, so your own branding appears on the slings you put into service.
Colour Coding and Working Load Limits
All bespoke webbing slings follow the BS EN 1492-1 colour code for quick identification of capacity, with orange used for 10t and above. The WLL varies with the hitch used: a choke hitch is rated at 0.8 × WLL, a parallel basket at 2 × WLL, and a 0–45° basket at 1.4 × WLL. These mode factors are printed on every sling label.
Webbing Sling or Round Sling?
Choose a webbing sling for long, flat or square-edged loads that benefit from a wide, stable bearing surface. For cylindrical or irregular loads, or where you want to rotate the sling to spread wear, see our UK Made Bespoke Polyester Round Slings.
How to Order
Select the WLL, enter your required EWL in millimetres (500mm to 40,000mm), and choose any protective sleeve and private label options above. For anything outside the listed options, use the product modification request and our team will quote for your exact requirement.
Need a standard size quickly? Our ready-made PlumAlti Duplex Webbing Slings (1t–10t WLL) are available from stock in standard lengths.
All webbing slings require a thorough examination at least every 6 months under LOLER. Our Sheffield and Manchester teams provide LOLER inspections for slings of every capacity.
Technical information
| WLL | 1t, 2t, 3t, 4t, 5t, 6t, 8t, 10t, 12t, 15t, 20t, 25t, 30t, 35t, 40t, 45t, 50t, 55t, 60t, 70t, 80t, 90t, 100t, 110t, 120t, 150t |
|---|
Key Features
- Manufactured to order by PlumAlti in Manchester
- WLL from 1t to 120t, including heavy-lift capacities from 12t upwards
- Made to your specified EWL, from 0.5m up to 40m
- Matched pairs and sets available for level, balanced lifts
- Duplex (double-layer) high-tenacity polyester webbing
- Wide, flat bearing surface for long, flat and square-edged loads
- Built to BS EN 1492-1 and Machinery Directive 2006/42/EC
- 7:1 safety factor
- Low elongation for steady, controlled lifting
- Resistant to UV, oil, grease and abrasion
- Optional factory-fitted protective sleeves
- Private labelling with your own branding
- BS EN 1492-1 colour coding, orange for 10t and above
- Blue traceability label with serial number, WLL, EWL and safety factors
- Usable from -40°C to +100°C
Safety & User Instructions
- Use the sling only for the lift it was specified for, and do not exceed its WLL.
- Apply the correct mode factor for the hitch used.
- Do not use the sling if the label is missing or illegible.
- Inspect the webbing, stitching and any sleeves before each lift for cuts, abrasion, burns and chemical damage.
- Withdraw the sling from service if the webbing is cut, frayed or the stitching is damaged.
- Make sure protective sleeves are correctly positioned over sharp edges before lifting.
- For heavy and multi-sling lifts, follow a lift plan prepared by a competent person.
- Check the load is balanced and stable before lifting, and avoid shock loading.
- Do not knot or twist the sling, or drag it or pull it from under a load.
- Keep away from alkalis, and check suitability before use near chemicals.
- Use only within the -40°C to +100°C range.
- Store clean and dry, away from direct sunlight and contaminants.
- Arrange a thorough examination at least every 6 months under LOLER.
